Search Results "signal pods"

Search Results
IMG_0245
By Joey O.
Analog Signal Pods Ducati Scrambler

Analog Motor Goods has developed a compact super bright mini LED turn signal. We have developed these special plug-and-play kits for your Ducati Scrambler and Desert Sled. The Analog Signal Pods are powerful mini indicators that are discreet until illuminated. Their low profile and robust construction keep them on par with the rest of the quality parts we here at Analog Motor Goods are known for.  These kits are designed for front or back placement. (See more details below). Manufactured by Denali Electronics. These are great replacements for the now closed Watsen Designs.  Check out the install video

  • Simple plug & play install
  • Super bright Amber LEDs
  • Waterproof
  • Heavy duty metal body
  • Built in voltage regulator
  • No need for resistors
  • Mounting hardware included
  • Power Draw: 6 Watts per signal (12W Pair)
  • Pod Size: 1.45″ (36.8mm) x 0.73″ (18.5mm) x 0.55″ (14mm)

Included in the Box:

  • 1 x pair of signals (2 kits needs for front and rear instal)
  • All necessary hardware for front or rear installation

Fits all Ducati Scramblers

Sold in Pairs

For Offroad Use Only, Not DOT Approved.

Read More
Flush mount Signal Pods illuminated
By Analog Store
Analog Signal Pods Flush Mount Universal LED Indicators

Analog Motor Goods has developed a compact super bright LED turn signal. The Analog Signal Pods are powerful mini indicators that are discreet until illuminated. Their low profile and robust construction keep them on par with the rest of the quality parts we here at Analog Motor Goods are known for. Manufactured by Denali Electronics. These are great replacements for the best selling Watsen Design ST indicators, from the now closed Watsen Designs.

  • Easy plug & play install
  • Super bright Amber LEDs
  • Waterproof
  • Heavy duty metal body
  • Built in voltage regulator
  • No need for resistors
  • Mounting hardware included
  • Power Draw: 6 Watts per signal (12W Pair)
  • Pod Size: 1.45″ (36.8mm) x 0.73″ (18.5mm) x 0.55″ (14mm)

Included in the Box:

  • 1 x pair of signals
  • 2 x 5mm x 20 set screw
  • 2 x 5mm Nylock nut
  • 4 x Posi-Lock Connectors

Sold in Pairs

For Offroad Use Only, Not DOT Approved.

 

Read More
Analog Signal Pods Triumph
By Analog Store
Analog Signal Pods Bonneville LED Indicators

Analog Motor Goods has developed a compact super bright LED turn signal. We have developed these special plug-and-play kits for your Bonneville T100 and T120 front signals. The Analog Signal Pods are powerful mini indicators that are discreet until illuminated. Their low profile and robust construction keep them on par with the rest of the quality parts we here at Analog Motor Goods are known for.  Pairs well with the Retro Lighting Kit. Manufactured by Denali Electronics. These are great replacements for the best selling Watsen Design ST indicators, from the now closed Watsen Designs.  Check out the install video here.

  • Easy plug & play install
  • Super bright Amber LEDs
  • Waterproof
  • Heavy duty metal body
  • Built in voltage regulator
  • No need for resistors
  • Mounting hardware included
  • Power Draw: 6 Watts per signal (12W Pair)
  • Pod Size: 1.45″ (36.8mm) x 0.73″ (18.5mm) x 0.55″ (14mm)

Included in the Box:

  • 1 x pair of signals
  • 2 x 5mm washers
  • 2 x 5mm x 8mm Allen Head Bolts
  • 2 x 8mm x 16mm Button Head Bolts

Fits Bonneville T100/T120 front turn signal Mounts. May fit rear but we have not tested.

Sold in Pairs

For Offroad Use Only, Not DOT Approved.

 

Read More
Triumph Street Twin Signal Pods
By Analog Store
Analog Signal Pods Street Twin LED Indicators

Analog Motor Goods has developed a compact super bright LED turn signal. We have developed these special plug-and-play kits for your Street Twin, Street Cup, Street Scrambler and Bobber front signals. The Analog Signal Pods are powerful mini indicators that are discreet until illuminated. Their low profile and robust construction keep them on par with the rest of the quality parts we here at Analog Motor Goods are known for.  Pairs well with the Retro Lighting Kit. Manufactured by Denali Electronics. These are great replacements for the best selling Watsen Design ST indicators, from the now closed Watsen Designs.  Check out the install video here.

  • Easy plug & play install
  • Super bright Amber LEDs
  • Waterproof
  • Heavy duty metal body
  • Built in voltage regulator
  • No need for resistors
  • Mounting hardware included
  • Power Draw: 6 Watts per signal (12W Pair)
  • Pod Size: 1.45″ (36.8mm) x 0.73″ (18.5mm) x 0.55″ (14mm)

Included in the Box:

  • 1 x pair of signals
  • 2 x 5mm washers
  • 2 x 5mm x 10mmAllen Head Bolts

Fits Street twin, Street Cup, Street Scrambler and Bobber front turn signal mounts. May fit rear but we have not tested.

Sold in Pairs

For Offroad Use Only, Not DOT Approved.

Read More
Analog_042120_023
By Joey O.
Analog Signal Pod Shock mounts with Hardware (pair)

The Analog Signal Pods have quickly become one of our best sellers. We have seen the need for additional mounting solutions so we have developed these Shock Mount plates for use on twin shock motorcycles. The Analog Signal Pods bolt perfectly to these plates and the other end bolts to your shock mount. Made of stainless steel so the mount hole can be drilled larger if needed.
(This listing is for a pair of Shock Mount plates only. Does not include Analog Signal Pods)

Perfect fit to Analog Signal Pods

  • Stainless Steel 16ga plate
  • Mounting hardware included
  • Only offered in powder coated black finish

Included in the Box:

  • 1 x pair of Analog Signal Pod Shock Mounts
  • 2x 5mm x 8mm bolts
  • 2x 5mm washers

Sold in Pairs

Read More
Analog_042120_032
By Joey O.
Analog Signal Pod Spacer Kits

The Analog Signal Pods have quickly become one of our best sellers. We have seen the need for additional mounting solutions so we have developed these incredible 1” (25mm) spacers to help with making them more visible in tight mounting locations. These little spacers help extend the mounting point just a little further to keep the signals more visible by getting them further away from the bike.
(This listing is for spacers only. Does not include Analog Signal Pods)

  • Perfect fit to Analog Signal Pods
  • Injection molded plastic with superior strength and finish
  • Mounting hardware included
  • Only offered in black

Included in the Box:

  • 1 x pair of Analog Signal Pod Spacers
  • 2x 5mm x 40mm set screws
  • 2x Washers
  • 2x Nylock nuts

Fits wherever Analog Signal Pods fit.

Sold in Pairs

Read More
AMG Retro Lighting Kit - Bonneville LED Tail Light Kit
By Joey O.
Analog Motor Goods Retro Lighting Kit for Triumph Bonneville T100/T120

A special plug-and-play option for 2016 and newer Triumph Bonneville models (T100 and T120), no drilling required. The Retro Lighting Kit offered by Analog Motor Goods is available to replace the huge OEM lighting setup on the rear of your machine. If you wish to keep your stock fender but hate the enormous stock lighting on the rear of your bike, we have just what you’ve been looking for. A plug and play, all-in-one lighting solution and replacement license plate bracket, the Retro Lighting Kit has you covered. Powder-coated black, with two available brake light housings (Analog Motor Goods Reverse Bates and Cone housings), the Retro Lighting Kit comes with Analog Signal Pods installed, wired, and ready to go.

Designed to work with U.S. license plates, some modification may be necessary for international applications. Not DOT-Approved, for off-road use only.

Read More
AMG Retro Lighting Kit - Street Twin LED Tail Light Kit
By Joey O.
Analog Motor Goods Retro Lighting Kit for Triumph Street Twin / Street Scrambler / Street Cup

A special plug-and-play option for 2016 and newer Triumph Street Twin, Street Scrambler and Street Cup models, no drilling required. The Retro Lighting Kit is a simple offering from Analog Motor Goods available to replace the huge OEM lighting setup on the rear of your machine. If you wish to keep your stock fender but hate the enormous stock lighting on the rear of your bike, we have just what you’ve been looking for. A plug and play, all-in-one lighting solution and replacement license plate bracket, the Retro Lighting Kit has you covered. Powder-coated black, with two available brake light housings (Analog Motor Goods Reverse Bates, and Cone housings), the Retro Lighting Kit comes with Analog Signal Pods installed, wired, and ready to go.

Designed to work with U.S. license plates, some modification may be necessary for international applications.

Read More
analog-motorcycles-retro-LED-lighting-kit-black-web
By Joey O.
LED Motorcycle Tail Light Assembly – AMG Retro Lighting Kit

The Retro Lighting Kit is a Universal offering from Analog Motor Goods available to replace the huge OEM lighting setup on the rear of your machine. If you wish to keep your stock fender but hate the enormous stock lighting on the rear of your bike, we have just what you’ve been looking for. A universal, all-in-one lighting solution and replacement license plate bracket, the Retro Lighting Kit has you covered. Powder-coated black, you can choose from two available brake light housings in two different finishes (Analog Motor Goods Reverse Bates, and Cone housings). The Retro Lighting Kit comes with Analog Signal Pods installed, wired, and ready to go.

Designed to work with U.S. license plates, some modification may be necessary for international applications.

Read More